FloorsCalcFree material planning tool
Tile Calculator
Estimate whole tiles and boxes for rectangular floors, walls, and backsplashes—without adding grout or adhesive.
Tile calculator
Result breakdown
- Room 1
- 120 sq ft
- Combined measured area
- 120 sq ft
- Measured area in square yards
- 13.33 sq yd
- Material allowance (10%)
- 12 sq ft
- Final material area
- 132 sq ft
- Individual tile area
- 1 sq ft
- Tiles before allowance
- 120
- Additional tiles from allowance
- 12
- Whole tiles required
- 132
FloorsCalc
Measurement System
Imperial
Inputs
- Room 1
- 10 ft × 12 ft
- Tile dimensions
- 12 in × 12 in
- Material allowance
- 10%
Result Breakdown
- Room 1
- 120 sq ft
- Combined measured area
- 120 sq ft
- Measured area in square yards
- 13.33 sq yd
- Material allowance (10%)
- 12 sq ft
- Final material area
- 132 sq ft
- Individual tile area
- 1 sq ft
- Tiles before allowance
- 120
- Additional tiles from allowance
- 12
- Whole tiles required
- 132
Planning estimate only.
Confirm product coverage and installation requirements before purchasing.
www.floorscalc.com
Exact calculation method
Tile area in square feet = tile length (in) × tile width (in) ÷ 144. Tiles before allowance = surface area (sq ft) ÷ tile area (sq ft). Apply the allowance and round the final tile and box counts up. Internal calculations retain full precision. Final tile and box quantities are rounded up only when a whole purchase quantity requires it.
Worked example
A 10 ft × 10 ft surface is 100 sq ft. A 12 in × 12 in tile is 1 sq ft. At 10%, the result is 110 whole tiles; 12 tiles per box requires 10 boxes.
Measurement tips
Measure surfaces in feet and enter actual tile dimensions in inches. Check the coverage or tile count printed on the box.
Inputs and results
Enter each rectangular area, choose Imperial or Metric, and adjust the visible material allowance. Product packaging information is optional and should come from the product box, carton, or manufacturer product page. Results separate measured area, allowance, final area, and whole purchase quantities.
Limitations and assumptions
No grout, thinset, spacers, layout centering, or pattern matching is calculated. Allowance depends on room shape, pattern, cuts, damage, product defects, installer recommendations, and manufacturer instructions.
Use this result for planning only. Verify measurements and order quantities with the product manufacturer or qualified installer.